NF Sunrise Linear Rail Mount

I very excitedly bought a NF Sunrise last year for my old CR-10s, and then very dejectedly could not figure out how to install it on my CR-10S, so I designed this.

MATERIALS:
This is intended to be cut out from 3mm (1/8") aluminum and bent into shape, not 3D printed (sorry!). I was able to find 12"x12" (310mmx310mm) aluminum plate on Amazon for US$20.

TOOLS REQUIRED:
- Vice
- Bandsaw (or hacksaw/coping saw)
- Center hole punch (I used an automatic center punch for wood, worked fine)
- Metal bending brake (or hammer and vice to bend)
- Regular or step drill bits (7/64" or 2.5mm, 9/64" or 3.5mm, 3/16" or 4.5-5mm, 1/4" or 6-6.5mm, and 3/8" or 10mm)
- Drill press and/or power drill
- M4 tap
- Spray adhesive

I used a small bandsaw, drill press, metal punch and DIY metal bending brake to make this. If you don't have those tools, you may have luck with a hacksaw or coping saw, a power drill and a vice and hammer (for bending),



I'm working on an instructables f