Niche Zero Portafilter Stand

UPDATE -- 5/15/2019

I've made a version of the Niche Zero PF stand for the Decent Espresso DE1 portafilter. The settings are as follows:

- H=39
- OD=81.5
- ID=73.5
- BH=5
- HANDLEW=21
- HANDLEH=8
- LUGL=0 // This is so that there is no cutout for the lugs. The lugs will just rest on top of the PF stand walls.
- SELECT=1


---------------------------------------

UPDATE -- 1/15/2019

I've made the following tweaks to the design

- Added an alignment tab (channel guide) which can be placed under the bolt head on the base of the Niche Zero. This solves the problem of the PF handle wandering while grinding.
- Added a notch on the back of the PF stand to accommodate the PF funnel with 2 tabs.
- Added a channel on the bottom of the PF stand to go over the alignment tab.
- Modified the SCAD file to select whether to print the PF stand or the alignment tab.

And... a video of grinding into the PF using the stand and funnel: https://youtu.be/CIa32hdEhw8

---------