Niko Witch Watch

Niko Witch WatchPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.3mmThe Max Depth is 3.4mm and the Actual Depth is 2.6mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Magenta Transmission Distance: 4 PLA Bambu Lab Basic Cyan Transmission Distance: 8 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 4.8This print uses 6 unique filaments Swap Instructions: Start with Charcoal At layer #20 (1.68mm) swap to Red At layer #21 (1.76mm) swap to Basic Magenta At layer #22 (1.84mm) swap to Cyan At layer #23 (1.92mm) swap to Orange At layer #26 (2.16mm) swap to Jade White for the rest.