Thingiverse
Nimble V2 Smart effector mount
par ZestyTech
49
Téléchargements
31
Likes
1
Makes
This adapter is specifically to mount the Nimble V2 on the very smart PCB effector that Escher3D is developing with Think3dPrint3d. It uses a hot end mount that is developed by E3D.
Have a look at the effector [here.]
(https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer)
In regards to the nut used to mount the hot end to the Smart Effector. There are two sizes of nuts used, unfortunately. 19 mm Across the Flats (AF) and 17 AF. Pick the right one.
Simply bolt the adapter to the hot end mount and bolt the Nimble to the adapter.
In case your printer is in pieces, or you want perfect precision, you can also get this adapter via [Shapeways.](http://shpws.me/RxYz)
Changelog:
- 1 Initial release
- 2 Changed the mount slightly (cleaning up a mistake) and added mount for larger 19AF nut
- 3 Modified the fan mount and duct a lot. There was a chance of hitting an arm in some positions, so now the fan mount is flatter and avoids that issue.
- 4 Deleted
Have a look at the effector [here.]
(https://duet3d.com/wiki/Smart_effector_and_carriage_adapters_for_delta_printer)
In regards to the nut used to mount the hot end to the Smart Effector. There are two sizes of nuts used, unfortunately. 19 mm Across the Flats (AF) and 17 AF. Pick the right one.
Simply bolt the adapter to the hot end mount and bolt the Nimble to the adapter.
In case your printer is in pieces, or you want perfect precision, you can also get this adapter via [Shapeways.](http://shpws.me/RxYz)
Changelog:
- 1 Initial release
- 2 Changed the mount slightly (cleaning up a mistake) and added mount for larger 19AF nut
- 3 Modified the fan mount and duct a lot. There was a chance of hitting an arm in some positions, so now the fan mount is flatter and avoids that issue.
- 4 Deleted
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
