Ninja cat hueforge

hueforge ninja cat. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Orange Transmission Distance: 7PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Red Transmission Distance: 5PLA Default White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Blue GrayAt layer #10 (0.88mm) swap to OrangeAt layer #13 (1.12mm) swap to YellowAt layer #14 (1.2mm) swap to Jade WhiteAt layer #20 (1.68mm) swap to OrangeAt layer #22 (1.84mm) swap to RedAt layer #25 (2.08mm) swap to White for the rest.