Nintendo Gamecube HDMI plate

This is my 3rd time making a part from scratch. Its designed to snap into the Digital AV Port on the back of the Gamecube. You MUST desolder the Digital AV port and install a KNJN Pluto-IIx board. You can purchase at this link http://www.knjn.com/ShopBoards_RS232_Parallel.html
To make it easy you should select the one that has GCVideo preflashed. GCVideo has wiring instructions found https://github.com/ikorb/gcvideo/blob/master/HDL/gcvideo_dvi/README.md
The HDMI port is centered in the plug but my port isn't 100% lined up with it. It is because I have secured the Pluto board to a screw hold just to the left of the analog video port. I also took a little dab of solder and used it to tack weld the HDMI connector to the shielding of the case. The bottom part of the print has a small section that can honestly be cut off and it will not cause any problems. I might make another version with the HDMI slightly off centered for those who decide to attach the Pluto board mentioned before.