Thingiverse

Nintendo Switch Dock Face Redesign

by yesimnathan

46 Downloads

42 Likes

0 Makes

This dock will not allow you to use the screen on your switch while in docked mode. It's just a redesign of the face plate to help avoid scratching the Switch screen when docking/undocking.

I had some issues with the original version. I couldn't get the LED diffuser into the slot, the screw terminals kept breaking off, the slots for this to attach to the dock were a little bit too tight, and the right side screw terminals seemed to be in the wrong place.

The changes I made for this remix:

- Replaced the screw terminals with heftier ones
- Widened the LED diffuser slot a tad
- Widened the slots for the dock to connect
- Repositioned the screw terminals on the right side & added a third

These two pieces fit together pretty tightly. I had to shave them down just a tad to make them fit well.

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format