Nitecore tip2 type c mode

Nitecore tip2 type c charging port modification project. You would need extra parts listed below and ability to solder type c PCB to main flex cable and unsolder old micro usb port. BOM: 1. Type c port and 2 wires to solder. Search for micro usb → type c in place modification ports sold on amazon/aliexpress/etc. They contain type c port and micro PCB with 2 CC resistors on it. 2. Two round magnets. I've used 6x2mm magnets. But you can change size a bit in parametric model menu. 3. “One second” cyanoacrylate glue to glue the magnets and type c port to printed chassis. Gel glue is recommended. Extra but recommended: 1. A bit of thermal paste to use with radiator plate 2. Something like epoxy glue to glue the PCB and wires to chassis on top. I've used a bit of hot glue, but it is not a best choice. You can find how to disassembly tip2 on internet, basically unscrew 2 screws near buttons, take old chassis out, take all the electronics out and unsolder old chassis with micro usb por