Nitro Rustler Spoiler Mount (Old school rustler)

I made this in Stinkercad, It was originally going to be adjustable Possibly still will in the future. It is designed to fit the 1/8 scale spoiler style of mount points with a self tapping screw. The mount is bolted into the shock tower. The body will have to be trimmed up or the mount will require spacing farther back (36mm spacers were tested to clear the 97 rustler body) (shown in picture) Front half was trimmed up to clear the original body style humps if directly mounted to the tower. May fit a Stampede

I printed this with a raft shock tower side down and supports for the flat section of the riser.

The Wheels are from PALMIGA,
They have a slight wobble to them that may be sorted out if you print at higher quality/ different materials. It didn't effect how they worked for me. If printing in same materials I would print the wheels in the tires in one shot. If using rubber like filament for tires the wheels will press fit and snap in place.
Wheels, Tires by PALMIGA
Set of