Thingiverse
Node 304 extra SSD mount PSU side
von Mothertrucker19
1
Downloads
1
Likes
0
Makes
A remix of Wookbert's SSD mount. I have a full height card in my setup in the PCIe slot, so I don't have space there for SSDs. Meanwhile I have plenty of space on the other side, though only for 3 drives.
It rests on the HDD cage screws, the cable tie loops on the frame rail and in the back on a fan screw of the rear fan. It only works for 140mm fans. I have included two models for normal 25mm fans and for thicker 30mm ones.
The model has two sets of screw holes, as I only had straight-90° SATA cables. (and a bottom piece to support this setup)
It rests on the HDD cage screws, the cable tie loops on the frame rail and in the back on a fan screw of the rear fan. It only works for 140mm fans. I have included two models for normal 25mm fans and for thicker 30mm ones.
The model has two sets of screw holes, as I only had straight-90° SATA cables. (and a bottom piece to support this setup)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
