Noggenfogger Elixir keycaps

Hello,This is a simple keycap with the Hueforge of a Noggenfogger Elixir on top of it.To whoever is addicted to noggenfoggers ! :) Project: noggCap2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 20x21.25mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.5mm and the Actual Depth is 1.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5.4 PLA BambuLab Basic Yellow Transmission Distance: 5.2 PLA BambuLab Matte Charcoal Transmission Distance: 0.1 PLA BambuLab Basic Green Transmission Distance: 2 PLA PolyLite Natural Transmission Distance: 25This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #4 (0.4mm) swap to Orange At layer #8 (0.72mm) swap to Yellow At layer #12 (1.04mm) swap to Charcoal At layer #13 (1.12mm) swap to Green At layer #16 (1.36mm) swap to Natural for the rest. Happy printing !