Non Overengineered Helping Hand

After 6 years of "I'm going to build this", I finally built it: My own helping hand.
As I found nothing that fits my needs on Thingiverse, I decided to design my own thing.

This is basically just a little threaded baseplate, mounted to the top of a basic electronics enclosure with some weights in it. Mine happened to have 20 mm wide holes on both sides, which were perfect to hold the battery charger on one side and a switch on the other. I also added a 50mm Fan as a very tiny fume extractor to guide the fumes away from my face. I still recommend a second bigger fume extractor with a filter close by though.

# Bill of Materials

### Hardware
- 120x80x50 mm ABS enclosure
- 4x 25 mm M3 bolts and nuts
- 4x 20 mm M4 bolts and nuts
- 6x 1/4" 300 mm plastic cnc cooling tube with round nozzle (AliExpress)[https://de.aliexpress.com/item/1005004609099236.html?spm=a2g0o.productlist.main.23.290e3488qVKzI9&algo_pvid=da58ca58-f4be-46b5-b0fc-8ad56a19c556&algo_exp_id=da58ca58-f4be-46b5-b0