Thingiverse
Non planar 3D printing test
di TeachingTech
1.8k
Download
1.4k
Likes
8
Makes
I stumbled across a video on non planar 3D printing and then created my own with a guide to trying out the amazing work of Daniel Ahlers: https://youtu.be/gmePlcU0TRw
Included here is the Slic3r profile, STL and gcode.
Gcode updated with the correct nozzle and bed heating gcode. The print shouldn't start anymore until both are up to temp. Also added a lift to Z 20mm before the homing in the end gcode.
*Warning! Please only print the gcode if you have removed all fan ducts and probes as shown in the video. Failure to do so will cause your print head to collide with the printed part. You cannot simply remove all of the fans, a fan must remain on the heat sink to prevent clogs.*
Included here is the Slic3r profile, STL and gcode.
Gcode updated with the correct nozzle and bed heating gcode. The print shouldn't start anymore until both are up to temp. Also added a lift to Z 20mm before the homing in the end gcode.
*Warning! Please only print the gcode if you have removed all fan ducts and probes as shown in the video. Failure to do so will cause your print head to collide with the printed part. You cannot simply remove all of the fans, a fan must remain on the heat sink to prevent clogs.*
TeachingTech pubblica anche su
94 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
