Non-Warping/Melting Camera Mount

Frustrated with my own remix, and wanting a mount that wouldn't deform (due to close proximity to the heated bed), I came up with this design... somewhat inspired by one-2_three's design, but I designed from scratch in Fusion360. I also wanted a joint that wouldn't slip. A kind redditor informed me the name of this type of radial joint is called a "Hirth joint"


Non-printed supplies you'll need:
--------------------------------------------
2 painter stir sticks (free from most home hardware stores)
1 M5 x 12mm bolt (flat head - hex drive)
1 M5 nut (for said bolt)
2 M5 x 20mm (hex head) (the cross-section image has 16mm... too short!)
2 M5 washers
2 M5 wingnuts
1 long bolt - to secure the camera to the mount (possibly M3?... I used a spare random bolt I found in a junk drawer)
3 (or 4) medium binder clips - 2 for the paiter-stick to the vertical support, the other two to clamp the stick to the Y-axis plate under the heated buildplate.


Printing:
-----------
All parts