Norns Case without spacers

This is the same box for the Norns I'm remixing, but with some differences.
Since Brexit, in EU we pay taxes when we buy something over 150€ in UK. Buying the PCB on Pusherman was below 150€, but buying also the spacers brought the price over 150€, making it way more expensive. So this design lets you mount it without these spacers.
You will M3 inserts (6), four M3 30mm screws and two M3 10mm screws (more or less those lengths, but similar will work).
You can also not use inserts and use some teflon on the screws, and they will hold too.
The inserts are placed on the two spacers (both sides), and on the long spacers that are part of the bottom box (the ones that hold the Norns PCB on the bottom).
The order in which you should mount everything is shown on "Montaje.png".
**** OH AND I ALMOST FORGOT****
If you use M3 inserts you will need to drill 3mm holes on the Raspberry pi and the Norns PCB, XD
If you have M2.5 inserts and screws you won't need to drill anything.