Thingiverse
Not Remotely Useful Remote Holder
door fionnom
63
Downloads
55
Likes
0
Makes
Entirely over-engineered storage for any sort of remote control. With room for two remotes, the capsule is opened at the press of a button.
Maximum remote size: 40mm x 15mm x 140mm (I'm using it for an Amazon firestick and projector remote)
A small spring is required, I salvaged one from an old printer, preferably less than 14mm in height.
I have included an stl for the central rod, however for more strength I would recommended any sort of rod that is 4mm in diameter. (I used an old plastic stick from a kite)
Other than that all parts can be printed without support.
Assembly can be tricky, check misc. notes for some tips!
Enjoy :))
Maximum remote size: 40mm x 15mm x 140mm (I'm using it for an Amazon firestick and projector remote)
A small spring is required, I salvaged one from an old printer, preferably less than 14mm in height.
I have included an stl for the central rod, however for more strength I would recommended any sort of rod that is 4mm in diameter. (I used an old plastic stick from a kite)
Other than that all parts can be printed without support.
Assembly can be tricky, check misc. notes for some tips!
Enjoy :))
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
