Not Today - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used:PLA BambuLab Matte Dark Red Transmission Distance: 1.5PLA BambuLab Basic Yellow Transmission Distance: 6PETG JAYO Black Transmission Distance: 0.3This print uses 3 unique filaments Swap Instructions:Start with Dark RedAt layer #7 (0.64mm) swap to YellowAt layer #23 (1.92mm) swap to Black for the rest.