Thingiverse
Nubert nuBox 311 Stand
von Niclas
2
Downloads
2
Likes
0
Makes
Stands for the nuBox 311 (and maybe others). Can be screwed to the bottom of the speaker with two or four M4x12 screws with washers.
Hole distances are 100 mm centers (like VESA100).
Both variants angle the box slightly upwards:
-15mm version: Back of the speaker 5 mm of the ground and front 20 mm.
-25 mm version: Back of the speaker 5 mm of the ground and front 30 mm.
In case you want to modify it:
https://cad.onshape.com/documents/be97e237de557a39aba28242/w/e2cd48600127ef833afb7207/e/6e58e7d61fb8a2dce8cfcc86
Hole distances are 100 mm centers (like VESA100).
Both variants angle the box slightly upwards:
-15mm version: Back of the speaker 5 mm of the ground and front 20 mm.
-25 mm version: Back of the speaker 5 mm of the ground and front 30 mm.
In case you want to modify it:
https://cad.onshape.com/documents/be97e237de557a39aba28242/w/e2cd48600127ef833afb7207/e/6e58e7d61fb8a2dce8cfcc86
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!