Nuka Cola Bottle Cap

First of all, this was just a test if Bambu Labs X1 could do it and o'boy did it do great job. Main thing here is, that the first layer was printed with line width 0.25mm, with 0.4mm nozzle! If you do normal 0.5mm, you loose the details. But in order to succeed, you need to have great plate adhesion and clean filament flow from the nozzle. I printed mine with textured PEI plate. I didn't have any matte red at hand, so the finish is a bit sparkly. I printed 3 of these at the same time, 2 were great but 1 had few flaws if you look really closely. First layer was printed with 50mm/s, other layers with 300mm/s (200mm/s in outer wall). The multicolor file is 3MF which should give you right colors automaticly in Prusaslicer and in Bambu slicer, but if it doesn't, just paint the whole thing red and color pour the logo as white (30sec job). Printables preview don't seem to show the colors correctly. If you want to print this with single color printer, use the separate-stl's 1 and 2 and place t