Thingiverse
NV14 Nirvana ELRS / Crossfire Mount
door Aaron5
1
Downloads
0
Likes
0
Makes
This module mount for the Nirvana (NV14) is designed to accept either Crossfire lite / full modules or Happymodel ELRS in a modified case.
You will need to have done the following mod on your nirvana to make use of this case: https://www.youtube.com/watch?v=4YAeHQtqTlw
Parts you will need:
Happymodel 2.4GHz ExpressLRS (ELRS) Micro TX - https://www.unmannedtechshop.co.uk/product/happymodel-2-4ghz-expresslrs-elrs-micro-tx/
2x THREADED BRASS BARB INSERT M3 - https://www.ebay.co.uk/itm/264096317255
2x M3 screws
1x Molex, CLIK-Mate, 502386 1.25mm Pitch 6 Way 1 Row Right Angle - https://uk.rs-online.com/web/p/pcb-sockets/6601090
1x Molex, CLIK-Mate, 502386 1.25mm Pitch 3 Way 1 Row Right Angle - https://uk.rs-online.com/web/p/pcb-sockets/6601084
Some hot glue
Some wire
You will need to solder the pins on the clik mate connectors to match that of the crossfire and then solder that to the happy model TX pins
Use the threaded barbs to screw the two sides together
The bung s
You will need to have done the following mod on your nirvana to make use of this case: https://www.youtube.com/watch?v=4YAeHQtqTlw
Parts you will need:
Happymodel 2.4GHz ExpressLRS (ELRS) Micro TX - https://www.unmannedtechshop.co.uk/product/happymodel-2-4ghz-expresslrs-elrs-micro-tx/
2x THREADED BRASS BARB INSERT M3 - https://www.ebay.co.uk/itm/264096317255
2x M3 screws
1x Molex, CLIK-Mate, 502386 1.25mm Pitch 6 Way 1 Row Right Angle - https://uk.rs-online.com/web/p/pcb-sockets/6601090
1x Molex, CLIK-Mate, 502386 1.25mm Pitch 3 Way 1 Row Right Angle - https://uk.rs-online.com/web/p/pcb-sockets/6601084
Some hot glue
Some wire
You will need to solder the pins on the clik mate connectors to match that of the crossfire and then solder that to the happy model TX pins
Use the threaded barbs to screw the two sides together
The bung s
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!