NVG-10 Binocular Mount

I had been looking for a way to mount two NVG-10 Digital Night vision monoculars together to make a binocular setup. After a few tests and adjustments I was able to make something that works really well, is adjustable, and is quick to print and assemble. You will need to get a a set of 12mm long M2 stainless machine screws and a two 12mm long M3 machine screws and two M2 Lock Nuts.
Printed in PLA+ at 100% infill, 215C print with a 65C Bed, and a brim.
Hope this helps others who want to build their own reasonably priced Binocular digital night vision.

NOTE: the field of view is quite narrow on these NVG's so I will be designing a step up ring adapter that will allow you to mount two small wide angle lenses to the threaded front of the goggles stock lenses. I have tested it with a larger version of the final lens and it made a HUGE difference in the ability to move and navigate in the dark. I will post a link to it and the lenses that I end up using in the final version here as w