Nvidia Shield Remote Stand (with and without cover)

Nvidia Shield Remote Stand (with and without cover) Created this stand for nvidia shield remote, which can be used with and without remote protection cover. Depending on your needs you can print the bottom in various variations: Multicolor The Bottom.stl file can be split to parts in your slicer and the letters can be colored individually. Manual color change The bottom plate is 5mm thick. Slice the Bottom.stl file with a pause at that height, manually change filament and continue printing. Separated letters Print the bottom plate without letters (Bottom (embossed).stl) and the letters (Letters.stl) in another color and put them together after printing (some glue may help). The letters are embossed by 1mm into the plate and have an offset of 0.1mm. If that will not fit on your printer try scaling up/down the letters in your slicer. Single color Just print the Bottom.stl or Bottom (embossed).stl file in the color you prefer. Additionally you will need 2x Holder.stl or Holder (with cover