Thingiverse
Ocho WiFi Matrix Array LED Box
door jgutz20
21
Downloads
18
Likes
0
Makes
Edit: 2/24/2022 - Added a bit more details and tips for getting things situated and connected as well as added a new base version with a momentary press switch (button) and URL to see which button i used.
Decided to make my own LED Light Assembly. So many i've tried have pieces that are so thin and fragile, i wanted to make something with a bit more substance. All assembled, the fixture comes in at 6.236oz. The base is blocky but i printed it hollowed out with internal supports and with the Siraya Tech Smoky Black resin i used, it looks amazing and almost carbon fiber like! I'm quite pleased with the outcome of this!
The Lid has 1.5mm thick walls and the Difference from the inner walls of the lid and the outer walls of the base is 1mm, so it is plenty snug without being over the top loose. The top is thick enough where you can use an orbital sander on it (i worked my way up to 1000 grit) for a nice surface and then i spray painted it with krylon matte finish clear coat
Decided to make my own LED Light Assembly. So many i've tried have pieces that are so thin and fragile, i wanted to make something with a bit more substance. All assembled, the fixture comes in at 6.236oz. The base is blocky but i printed it hollowed out with internal supports and with the Siraya Tech Smoky Black resin i used, it looks amazing and almost carbon fiber like! I'm quite pleased with the outcome of this!
The Lid has 1.5mm thick walls and the Difference from the inner walls of the lid and the outer walls of the base is 1mm, so it is plenty snug without being over the top loose. The top is thick enough where you can use an orbital sander on it (i worked my way up to 1000 grit) for a nice surface and then i spray painted it with krylon matte finish clear coat
jgutz20 publiceert ook op
7 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!