OctoPi Control Box

OctoPi with PSU control using the printers power supply. With this setup the printer can be turned on using OctoPi and the entire system can be turned on/off with the printer's power switch for longer periods of inactivity.

I've designed this control box to accommodate a Raspberry Pi 3 B+, one or two LM2596 buck converters, one or two relay boards, and a 30mm fan. There are mounting holes for any combination of the above. The adapter has the same footprint as a one of the relays to fit a small power rail that i've made, but you could just solder the connections and forego the adapter all together.

I'm using the LM2596 to convert the printers 24v to 5.2v in order to power the Raspberry Pi and relay. The fan could also be connected to this, but i've opted to use the 3v supply from the Raspberry's board which keeps the fan a bit quieter. It is important to test the voltage of the converter before connecting accessories and under load to make sure that the voltage is within toleran