Oculus Rift Camera Wall Mount

This design is a wall mount for an Oculus Rift sensor. The advantage of this wall mount over other designs is that it allow you to pan the sensor without tilting it off axis from the horizontal.

You will need 2 short .25-20 screws, one to be used to lock the pan angle and the other to secure the stem of the sensor into the print. I added two small holes in the design to secure the cable with a small zip-tie or an M3 screw. The base of this mount is designed to use a Velcro Command Strip to secure it to a wall but any double sided tape should work.

The two printed parts should snap together but be careful and make sure not to do it to fast or with an excessive amount of force other wise the top portion of the design might break.

Velcro Command Strip Amazon Link - https://www.amazon.com/Command-Picture-Hanging-8-Medium-17203-ES/dp/B000OF6X48/ref=sr_1_5?ie=UTF8&qid=1546576848&sr=8-5&keywords=velcro+command+strips