Thingiverse
ODROID H3/H3+ Fan Bracket
von labpro
2
Downloads
1
Likes
0
Makes
3D printed fan grill for a 92mm fan on the ODROID H3+.
Fan mounts to print with threaded fan screws or zip ties. The print itself is friction mounted to heatsink with small retention lip on bottom of the corner brackets. The fan/bracket is slightly off-center so the print is labeled with the portion that corresponds to the SATA ports on the board (ie, Above SATA on print should align above the SATA ports on the board).
Fan used is a Scythe KazeFlex 92 Slim for those interested.
Fan mounts to print with threaded fan screws or zip ties. The print itself is friction mounted to heatsink with small retention lip on bottom of the corner brackets. The fan/bracket is slightly off-center so the print is labeled with the portion that corresponds to the SATA ports on the board (ie, Above SATA on print should align above the SATA ports on the board).
Fan used is a Scythe KazeFlex 92 Slim for those interested.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
