Thingiverse
Odroid H3/H3+ Type 2 Case
von mtak
1
Downloads
3
Likes
0
Makes
Type 2 case for the Odroid H3/H3+.
Hardware required:
- 4x M4 nuts and bolts for attaching the fan and the guard
- 4x M3 bolts for attaching the top to the bottom
- 4x M3 brass insert
- 92mm computer fan
- Some dust filter media
- A switch (if required). This design has a 10mm hole in it for a switch, but it should be easy to modify if required. Behind the switch is plenty of space.
Make sure to install the fan so it sucks air from the top and blows it out the bottom. Otherwise the filter won't do much good :)
Hardware required:
- 4x M4 nuts and bolts for attaching the fan and the guard
- 4x M3 bolts for attaching the top to the bottom
- 4x M3 brass insert
- 92mm computer fan
- Some dust filter media
- A switch (if required). This design has a 10mm hole in it for a switch, but it should be easy to modify if required. Behind the switch is plenty of space.
Make sure to install the fan so it sucks air from the top and blows it out the bottom. Otherwise the filter won't do much good :)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
