Olaf Forrest Bookmark Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 57.9x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA Overture Yellow Transmission Distance: 9.7 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions: Start with Charcoal Black At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Dark Brown At layer #14 (1.2mm) swap to Yellow At layer #16 (1.36mm) swap to Silver At layer #20 (1.68mm) swap to Beige At layer #22 (1.84mm) swap to White for the rest.