Olaf Inspired Hueforge

Project: 8 Olaf.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #623e2a PLA PolyTerra Earth Brown Transmission Distance: 0.3 #785c50 PLA Overture Brown Transmission Distance: 0.5 #062b4d PLA PolyTerra Army Blue Transmission Distance: 0.3 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #db3e14 PLA PolyTerra Muted Red Transmission Distance: 1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Earth Brown At layer #11 (0.96mm) swap to Brown At layer #12 (1.04mm) swap to Army Blue At layer #13 (1.12mm) swap to Marine Blue At layer #14 (