Olight Oclip Pro - Picatinny Mount

This is a custom designed case/mount for the Olight Oclip Pro, for a standard Picatinny firearm rail. With this mount, the light is oriented facing forward, and the rotary function switch is operable on the side of the light. Printed in Bambu PLA Basic, or SUNLU PLA+2 - any PLA should work fine. Installing the mount on a Picatinny rail like this one (pictured) will require one M3x14 (or longer) screw. The screw does not secure through the other side of the mount currently, but it's sufficient the way it is to hold the light in place firmly. The light can also be mounted vertically and stay in place, due to the tab that the spring-loaded claw grabs. Removing the flashlight from the case is a bit challenging due to tight tolerances. I found the easiest way was to sharply smack the case into your opposite hand, causing the light to extrude a small mount from the case. You should then be able to grab it and pull the rest of the way out. Note: This is the very first model that I've ever pub