Olympic Torch With LED Lights

This is an olympic torch I designed, because I needed it for a roleplay. The torch can be equipped with lights. Assembly:Glue the 3 flames on the top pieceOptional: Glue LEDs into the flames. I glued 1 LED in each flame and connected them in series. I also used a switch to toggle the lights. I recommend to use hot melt glue to glue the switch into the recess. The LEDs are powered by a 9V battery. Be aware that you will need a resistance to protect the LEDs.Glue the pins in the top pieceGlue the top piece onto the middle pieceScrew the handle on the middle pieceThe switch I used: https://de.aliexpress.com/item/1005003938856402.html?spm=a2g0o.order_list.order_list_main.48.678b5c5ff9L30Y&gatewayAdapt=glo2deu The LEDs I used: https://de.aliexpress.com/item/1005003337160679.html?spm=a2g0o.order_list.order_list_main.53.678b5c5ff9L30Y&gatewayAdapt=glo2deu I printed the torch itself in Bambu gold and the flames in Bambu PETG translucent. No supports needed. If there are any questions let me kn