Thingiverse
Omega - A wireless charging mount.
par Pfahli
41
Téléchargements
47
Likes
0
Makes
This is a wallmount/deskstand for those cheap QI-chargers that you can find nearly anywhere. It should measure exactly 70mm in diameter and around 10mm in height. The one I used is rated at 1500 mA with an input of 5V which allows me to charge my iPhone at a sufficient rate. The micro-usb cable I used has a round connector.
It can be attached to the wall (either with screws or with double sided tape) or used on the desk by routing the cable through a small channel on the bottom to the back of the mount.
I designed and tested it with an iPhone X, so it should fit the iPhone 8, XS, 11 and 11 Pro and various android phones as well. Large phones like the iPhone XS Max, and the 11 Pro Max may not charge perfectly, as the height of the charging coil isn't optimized for these phones.
It can be attached to the wall (either with screws or with double sided tape) or used on the desk by routing the cable through a small channel on the bottom to the back of the mount.
I designed and tested it with an iPhone X, so it should fit the iPhone 8, XS, 11 and 11 Pro and various android phones as well. Large phones like the iPhone XS Max, and the 11 Pro Max may not charge perfectly, as the height of the charging coil isn't optimized for these phones.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !