OmicronLab Bode100 BNC adapters compartment

OmicronLab Bode100 VNA is an excellent piece of measuring equipment which comes with four different BNC adapters (straight, T, Short and Load 50 Ω). If using the adapters more often it's convenient to keep them in place and here is the first version of compartment for the Bode100 BNC adapters, which can be clamped to the aluminium profiles on the device sides. It uses three moving parts for clamping in place.

Push M3 nuts into the Clamp details and then use 3x M3x16 screws to attached the compartment of the Bode100 side.

When printing the parts (0.2mm layers) - use 100% infill for the Clamp parts and if possible print them on side to get more strength (you can also use high strength filament). The main body can be printed with 20% infill and 3 walls.

Printed with BambuLab X1C AMS, the text was engraved with 20W fibre laser (the laser is discoloring the filament, which results in lighter color characters).