OMVS Shell With Split Parts

The top and bottom of the shell have been modified for printing with much less support material, and require less post processing to use.

The top shell can now be printed on most printers around Ender 3 in size or bigger.

The Top p2 will need supports, I would also suggest adjusting your overhang angle so that your overhangs will be perpendicular to the outside perimeters.

The bottom shell will need to be printed on a bigger machine, around 280x280, or you may need to split it in order to get it on a smaller printer.

You will need 4 M3x6mm or #4x1/4" screws for the bottom shell pieces, or glue to keep them together. You will also need a M2x6mm for the top shell