MakerWorld
Hueforge & Lithophane
Zum Modell
One Piece Bookmark HueForge
54
Downloads
48
Likes
32
Makes
Luffy's eyes Bookmark HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 190x56.78mm in size. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 2.3mm. Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Silver At layer #16 (1.36mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
