One piece Hueforge

Project: luffy.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x112.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.88mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.15998mmSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Grey At layer #21 (1.76mm) swap to White At layer #23 (1.92mm) swap to White for the rest.