One Piece logo

by Mano's 3d_Art · Hueforge & Lithophane

3 Downloads

4 Likes

2 Makes

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 126.6x224.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Yellow Transmission Distance: 5.9This print uses 3 unique filaments Swap Instructions: Start with Scarlet Red At layer #12 (1.04mm) swap to Black At layer #22 (1.84mm) swap to Yellow for the rest.