ONE PIECE MONKEY LUFFY HUEFORGE DESIGN 03

LIKE AND FOLLOW FOR MORE DESIGNS Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.6mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #20 (1.68mm) swap to Jade White for the rest.