one piece ruffy shanks

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200.01mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite White Transmission Distance: 5 PLA+ Sunlu Red Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to White Border Only Colors from here until the end. At layer #15 (1.28mm) swap to Red for the rest.