Thingiverse
OneWheel Pint Latching Switch Adapter
door SeaOry
2
Downloads
0
Likes
0
Makes
Adapts a latching switch to use in the OneWheel Pint for VESC or other purposes.
The adapter allows the use of the factory rubber button and without modification to the box. I use an O-Ring as a detent to secure it so that there is no chance of something breaking off inside the box or getting loose while riding.
This may work with other switches but I designed it for this one:
https://a.co/d/c8WxmvU
DIYhz Push Button Switch, Self-Locking Mini Switches Latching 10mm Round DC24V 0.5A Black Cap
I epoxied the switch inside the holder. I also clip the tabs at the back shorter and solder wires directly to them, then pot the back opening with epoxy to seal everything in.
The adapter allows the use of the factory rubber button and without modification to the box. I use an O-Ring as a detent to secure it so that there is no chance of something breaking off inside the box or getting loose while riding.
This may work with other switches but I designed it for this one:
https://a.co/d/c8WxmvU
DIYhz Push Button Switch, Self-Locking Mini Switches Latching 10mm Round DC24V 0.5A Black Cap
I epoxied the switch inside the holder. I also clip the tabs at the back shorter and solder wires directly to them, then pot the back opening with epoxy to seal everything in.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
