onvis-switch-hs2-sys55-mod

This mod makes your Onvis Switch HS2 compatible with a Gira System 55 frame.

This allows for an existing row of switches to be easily expanded without construction work.
For this, simply buy a larger frame and insert the modified Onvis switch from the front.

Attention. Modifying the device is your responsibility. I am not responsible for possible defects. Opening the device affects the manufacturer's warranty.

Notes

I printed all the parts with the Bambu Lab X1. I cannot guarantee that the parts will also be compatible with other 3D printers.
All parts were printed with PETG, 0.4 mm nozzle and 0,2mm layer height.
So far, I have only installed switches in the Gira Standard 55 frame and cannot guarantee that the switch is compatible with other design lines.

Instructions

Print out the following components in the specified quantity

1 x base_part.stl
1 x top_part.stl
1 x large_button.stl
4 x small_button

If the switch is too loose or too tight due to tolerances, try the base_part.st