Onyx Hueforge 5x7

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 127.1x178mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #17 (1.44mm) swap to Silver At layer #21 (1.76mm) swap to Sunflower Yellow At layer #24 (2mm) swap to Jade White for the rest.