Thingiverse
Learning
Ver Modelo
Open Ocular Y-axis mod
133
Descargas
94
Likes
5
Makes
I love the OpenOcular model, but I wanted a y-axis mount that also helped clamp the phone in place. I also removed the flat supports from the clamps to remove the light gap between the phone and the mount.
I also reduced the logo depth to save on plastic a bit
In addition to this mod, you'll have to print an additional thumbnut_eyepiece_clamp_PT37.stl from the original model.
UPDATE 2021-01-05:
I have added extended versions of both the screw clamp and the housing to accomodate larger devices. Depending on your printer, these may need to be printed diagonally to fit on your print bed.
I also reduced the logo depth to save on plastic a bit
In addition to this mod, you'll have to print an additional thumbnut_eyepiece_clamp_PT37.stl from the original model.
UPDATE 2021-01-05:
I have added extended versions of both the screw clamp and the housing to accomodate larger devices. Depending on your printer, these may need to be printed diagonally to fit on your print bed.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
