Open PC wall case - acoustic panels

I needed to save some space, so I decided to mount my PC on my wall aka acoustic panels, which are mounted on my wall. The whole print can be done without any screws except for the mainboard. Due to the bed size of my p1s the mainboard holder needs to be splitted for the print and assembled with M4x30 screws. It's a bit wobbly before inserting it into the panels, so be careful. If someone wants the mainboard in one bigger piece, just comment it I will upload it.You can use the basic mainboard screws to fix the mainboard on it.Every part which carries hardware, can be secured with a screw into the acoustic panels. If your setup is expensive, you should consider to put some screws into it.. but basically everything holds fine without any additional screw. So I fixed my mainboard with 3 additional screws. The graphic card holder, it holds also an aver media 4k capture card. If you have used Fractal Design North case before, like me, you can disassemble and take the power button / usb