Open racer - XT60 Mount
door rgbskills
31
Downloads
11
Likes
0
Makes
This is an XT60 Mount for the open-source racing frame "Open racer".
Details on the frame here: https://github.com/rgbskills/fpv_open_racer
# assembly
You need to apply super glue to the interior of the printed part and the exterior of the XT60, once applied you will need to push the XT60 into the slot quickly. first, position the flat part of the XT60 (+ sign) and then the other side (- sign) and push it in all the way so it's flush in the printed part.
**ATTENTION:** not applying supper glue can damage the Vbat pads on your FC/ESC when plugging or unplugging LiPo'as
Details on the frame here: https://github.com/rgbskills/fpv_open_racer
# assembly
You need to apply super glue to the interior of the printed part and the exterior of the XT60, once applied you will need to push the XT60 into the slot quickly. first, position the flat part of the XT60 (+ sign) and then the other side (- sign) and push it in all the way so it's flush in the printed part.
**ATTENTION:** not applying supper glue can damage the Vbat pads on your FC/ESC when plugging or unplugging LiPo'as
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
