Open Source - 3D Printable "Cable Cam / Rope Cam"

Yet another use for 4020 rail; A 3D Printable similar to "Rope Cam", "cable cam", or other similar trade names.

Includes Fusion 360 Original Files for editing if so desired.

)Belt = 3M-300 or 3M-315 (GT2-3M x 300) @ 6mm wide (HTD3M) - search reprap
) 608 Bearings - 2 Per Wheel
) 3D Printable pulleys, gears, motor mounts, ESC holder and battery box.
) Mount to a 1M or "whatever length you want" 4020 extrusion
) Get a 3665 or 36XX motor kit with ESC - First two digits = diameter, last two = length (longer = more power)
) Get a receiver. I like the Flysky or Frsky 6 channel radios.
) Bind it to your transmitter.
) Charge up the battery - I used the Tattu 1550mAh 3S 11.1V
) Use at your own risk. Program your stops and lower your max throttle curves and do a radio dropout test to your fail safe settings to avoid a runaway
) Use a rubber band on the drive wheel to get traction on the line
) A heavier load requires a heavier line, which itself is heavier... Learn a