Open source terp temper v0.2

Got the model itself where I’d like it, the arduino doesn’t play very well with 9 volt input though it seems(this isn’t an authentic board, so who knows how good the components are). I ordered a buck converted to step it down to the native 5 volts, the case should be more than large enough to accomadate. Failing that, I might look into lipo packs, but that’s a headache I don’t feel like giving myself.

These are the .stl files for printing
print ready v1body.stl (128.5 KB) print ready v1lid.stl (73.1 KB) print ready v1sensorlid.stl (100.5 KB) sensorbody.stl (124.8 KB)

Planned improvements:
add a status LED, preferably RGB
add a charging port/battery setup, as is it has to be disassembled
add capacitor/resistors

Parts required:

Arduino, I used a pro micro but whatever fits works
SSD1306 OLED screen
MLX90614 IR sensor - I need to come up with a lens or reflection tube, it has too wide of a FOV as is
2x 7mm panel mount momentary spst switches
1/4" loc-line
6x M2 x 4mm