Thingiverse
OpenAstroTracker - Tripod Legs AddOn
door deltaclo
38
Downloads
35
Likes
0
Makes
Here is my first contribution to the OAT project.
I was tired of setting a table for the OAT so I designed legs.
Part list:
- 9 500mm 2020 aluminium profile
- 54 M4x12 screws and T-nuts
- 3 M5 screws and T-slide
- 6 M5x80mm threaded rod and 12 M5 nuts
- 2 M6 bolt and butterfly nuts
- 1 720x500x15mm plywood plank (use the template to cut the final shape)
Printed part list:
- 1 Tripod_mont_right_2020base.stl
- 1 Tripod_mont_rear_2020base.stl
- 1 Tripod_mont_left_2020base.stl
- 3 top.stl
- 6 slide.stl
- 3 mid out.stl
- 3 mid in.stl
- 3 mid plate.stl
I was tired of setting a table for the OAT so I designed legs.
Part list:
- 9 500mm 2020 aluminium profile
- 54 M4x12 screws and T-nuts
- 3 M5 screws and T-slide
- 6 M5x80mm threaded rod and 12 M5 nuts
- 2 M6 bolt and butterfly nuts
- 1 720x500x15mm plywood plank (use the template to cut the final shape)
Printed part list:
- 1 Tripod_mont_right_2020base.stl
- 1 Tripod_mont_rear_2020base.stl
- 1 Tripod_mont_left_2020base.stl
- 3 top.stl
- 6 slide.stl
- 3 mid out.stl
- 3 mid in.stl
- 3 mid plate.stl
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
