openGrid MultiConnect Micro-ATX (mATX) Mount

I wanted to mount my test-machine on the wall - because I can. The pictures are still with a spare mATX motherboard I had lying around - which is a bit bigger than intended. The backets are designed for a motherboard the size of a Gigabyte GA-H110M - which is a bit narrower than the ASUS H170M-Plus pictured, so the bracket will nicely align with the side edge. All elements were designed to be printed without supportsThe top bracket can accomodate three MultiConnect points on a openGrid base. For the lower bracket there are two options, a split solution, and a full bracket. The split solution will need at least two vertical aligned multiconnects. I'd recommend the anti-rotational version by 3Ddy!The full bracket solution needs just two MultiConnect point and actually saves a bit of filament compared to the split version.Both top and full-width bottom bracket have space to route some cables through for a cleaner mount. I succesfully printed it with 15% gyroid infill, no supports and