Thingiverse

OpenMQTTGateway

von maxl1995

31 Downloads

18 Likes

1 Makes

This is my housing of the openMQTTGateway made by 1technophile:
https://github.com/1technophile/OpenMQTTGateway

For wiring and firmware, please check the wiki of 1technophile's repo.

The following things are needed:

IR-Emitter 5mm:
https://www.banggood.com/50pcs-5mm-940nm-IR-Infrared-Diode-Launch-Emitter-Receive-Receiver-LED-p-1205409.html?rmmds=myorder&cur_warehouse=CN

Wemos D1 mini:
https://www.banggood.com/Geekcreit-D1-mini-V2_2_0-WIFI-Internet-Development-Board-Based-ESP8266-4MB-FLASH-ESP-12S-Chip-p-1143874.html?rmmds=myorder&cur_warehouse=CN

IR-Receiver:
https://www.banggood.com/10pcs-Universal-IR-Infrared-Receiver-Head-With-Iron-Shell-TL1838-VS1838B-1838-38Khz-p-1211280.html?rmmds=myorder&cur_warehouse=CN

DC-Socket:
https://www.banggood.com/10pcs-DC-022-5_5-2_1mm-Round-Hole-Screw-Nut-DC-Power-Socket-ROHS-Internal-Diameter-5_5mm-p-1200831.html?rmmds=myorder

433Mhz Transmitter and Receiver:
https://www.banggood.com/433MHz-100M-Wireless-Transceiver-Module-

1technophile 433mhz AmazonEcho diy electronics ESP8266 IR Gateway mqtt openhab RF433 RF433 Gateway WeMos D1 Mini 1technophile 433mhz AmazonEcho diy electronics ESP8266 IR Gateway mqtt openhab RF433 RF433 Gateway WeMos D1 Mini

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat